Double router release method (bridge continuation method)

The way to do a bridge connection and release double routers.

Release method in detail of the equipment I was using before is explained. I just did using a router of 2 following.

• PR-200NE (modem router  NTT East  FLETS light corresponding to the light telephone  B Flets) 
• WBR-G54 (wireless LAN router  AirStation: air station  BUFFALO: buffalo)

The wireless LAN router (WBR-G54) is made a bridge connection and double routers are evaded.

A bridge connection is the way not to use the router function, to use as HUB and to connect 2 of equipment. It's said that they combine as an identical segment. In other words, it's to make the wireless LAN router the equipment to which a just radio is just transferred.

 

A procedure in detail will be below.

1. A command prompt is started.
2. “tracert www.google.com” is carried out by a command prompt (Even tracert 66.249.89.99 is OK.)
3. An IP address of NTT indicated by "tracert" is noted.
4. The figure of the last limit of the noted IP address is made the price different from other equipment in a modem (100).
5. The cable which is WBR-G54 and is connected to the WAN (FLET’S light  From B Flets) side is removed.
6. In WBR-G54, from a PC, a LAN access (most, port), only, it's done in the state.
7. The network connection of a PC is made a wired connection.
8. Just in case, I insert and remove a power supply of WBR-G54 and make them restart.
9. I access 192.168.11.1 of AirStation(http://192.168.11.1/top.html).
10. An air station setting page is clicked.
11. It's input to a user ID of the dialogue with root.
12. When there is a password, it's input (there is no ordinariness, so, just as it is).
13. An advance is clicked.
14. A LAN port is chosen from LAN setting and it's clicked.
15. First IP address 192.168.1.100 of noted NTT is input to a LAN side IP address.
16. The DHCP server function "isn't used", it's established.
17. A LAN cable from PR-200NE (light B FlET'S of NTT) is connected to LAN port pin of WBR-G54 (the 4th port).
18. A PC is restarted.
19. “tracert www.google.com” is tried by a command prompt.
20. ntt.setup where air.setup [192.168.11.1] cries [192.168.1.1]  When it's 1, it succeeds.
21. A network connection of a PC is returned to a radio connection.

 

When connecting to AirStation of WBR-G54 after setting has ended, it'll be the address established by the above (http://192.168.1.100/top.html). That a port of a LAN access above-mentioned is most, number 4 is used, but which port may it be connected to?

The "its address can't designate the error which is a procedure of double router release and is good. An error occurred by setting. Please redo.", And, I sometimes go out. This can consider that a LAN cable becomes a WAN terminal while being connected as the cause.

 

By the way, new wireless LAN equipment has the function from which you release double routers automatically. When settling it easily, new wireless LAN equipment can buy it, and it's quick to change it, isn't it?